The GPS Over Fibre Link by Optical Zonu provides a simple, cost-effective and reliable RF connection between the GPS antenna and receivers in those instances where coaxial cable is impractical. Each link is wideband and supports any of the global GPS frequencies – current or future. The high dynamic range of the system ensures a transparent pass through with no distortion. A low noise pre-amplifier ensures a margin on signal-to-noise ratio while keeping the signal in the most linear operating range of the fibre optic link.

The unit housing is a compact, IP-50 enclosure. The link supports one GPS antenna. AbBuilt-in Bias-T provides the needed DC power for the active GPS antenna. While the Optical Zonu GPS Fibre Transport Link can be used for point-to-point applications, the link may also be optically split up to 8 ways to provide cost-effective GPS distribution to multiple locations over lightweight fibre cable. In addition, the receiver is available with either one or two RF outputs.

These linear RFoF Transceivers provide an excellent alternative to coaxial cable for distances from 100m to over 10 km.  The standard optical connector is the SC/APC (FC/APC is also available) for low back reflection. This, along with the integral optical isolator, helps guarantee transparent transport without additive Noise or spurious signals.

The laser diode is an uncooled device that provides stable operation over the entire ambient Operating Temperature Range of –20 °C to +65 °C.   Average Automatic Power Control (AAPC) is utilized for optimal optical power stability over the full temperature range.

The RF interface is a 50 Ohm SMA connector and the Alarm and Monitoring Functions are available through a DB9 connector. The standard unit requires +12 VDC power between pins 4 and 5 of the DB9 connector.