View PDF brochure for GPS Fiber Optic Receiver Single ModeDatasheet

GPS Fiber Optic Receiver Single Mode

SKU: A23-GPS-00-AS-S

Contact us for latest price
In Stock


Calculate Shipping



Freight to be quoted - $0.00
As the size and weight is not normally known we use several freight carriers to ensure you get the best price. Complete your order or quote and we will get back to you with the available freight options.

GPS Fiber Optic Transmitter

The GPS Over Fiber Link by Optical Zonu provides a simple, cost-effective and reliable RF connection between the GPS antenna and receivers in those instances where coaxial cable is impractical. Each link is wideband and supports any of the global GPS frequencies – current or future. The high dynamic range of the system ensures a transparent pass through with no distortion. A low noise pre-amplifier ensures a margin on signal-to-noise ratio while keeping the signal in the most linear operating range of the fiber optic link. The unit housing is a compact, IP-50 enclosure. The link supports one GPS antenna. A Built-in Bias-T provides the needed DC power for the active GPS antenna. While the Optical Zonu GPS Fiber Transport Link can be used for point-to-point applications, the link may also be optically split up to 8 ways to provide cost-effective GPS distribution to multiple locations, over lightweight fiber cable. In addition, the receiver is available with either one or two RF outputs.


These linear RFoF Transceivers provide an excellent alternative to coaxial cable for distances from 100m to over 10 km. The standard optical connector is the SC/APC (FC/APC is also available) for low back reflection. This, along with the integral optical isolator, helps guarantee transparent transport without additive Noise or spurious signals.
The laser diode is an uncooled device that provides stable operation over the entire ambient Operating Temperature Range of –20 °C to +65 °C. Average Automatic Power Control (AAPC) is utilized for optimal optical power stability over the full temperature range.


The RF interface is a 50 Ohm SMA connector and the Alarm and Monitoring Functions are available through a DB9 connector. The standard unit requires +12 VDC power between pins 4 and 5 of the DB9 connector.

Features

  • Supports GNSS, Galileo, GLONASS

  • Compact Packaging: 3 x 5 x 1.25 in. @ ¾ lb

  • -20ºC to +65ºC TOP Range • Provides +5 VDC DC Bias for the GPS Antenna

  • No RF Sensitivity Impact

  • Patented Optical Antenna Alarm Reporting

  • 20 dB Gain Supports Optical Splitting for GPS Distribution

  • Laser Conforms to Class IIIB Emission Level and IEC-825 (EN 60825) standard

A23-GPS-00-AS-S
Brand Optical Zonu
Datasheet:

More From This Category


GPS Fiber Base Unit, 1 CH/4 RF Out/1 Fiber/-48 VDC

GPS Fiber Base Unit, 1 CH/4 RF Out/1 Fiber/-48 VDC

SKU: A23-Z9501-GPS-AS-S-48

GPS Fiber Optic Receiver Single Mode

GPS Fiber Optic Receiver Single Mode

SKU: A23-GPS-00-AS-S

GPS Fiber Optic Transmitter

GPS Fiber Optic Transmitter

SKU: A13-GPS-00-AS-SLB

GPS Fibre Antenna Unit, 1 CH, 1 Fibre, -48 VDC

GPS Fibre Antenna Unit, 1 CH, 1 Fibre, -48 VDC

SKU: A13-TL1GPS-D31-NS-SLB-48

GPS Fibre Antenna Unit, 2 CH, 1 Fibre, +12 VDC

GPS Fibre Antenna Unit, 2 CH, 1 Fibre, +12 VDC

SKU: A13-TL2GPS-D31D55-NS-SLWB

GPS Fibre Antenna Unit, 2 CH, 1 Fibre, -48 VDC

GPS Fibre Antenna Unit, 2 CH, 1 Fibre, -48 VDC

SKU: A13-TL2GPS-D31D55-NS-SLW

GPS Fibre Antenna Unit, 2 CH, 2 Fibre, -48 VDC

GPS Fibre Antenna Unit, 2 CH, 2 Fibre, -48 VDC

SKU: A13-TL2GPS-D31-NS-SLB-48

GPS Fibre Base Unit, 1 CH, 1 RF Out, 1 Fibre, AC

GPS Fibre Base Unit, 1 CH, 1 RF Out, 1 Fibre, AC

SKU: A23-Z9501-GPS-AS-S