OZ600 Series RFoF Transceiver with 1550 nm laser

SKU: A13-Z600-55S-AF-M0L

Contact us for latest price
In Stock


Calculate Shipping



Freight to be quoted - $0.00
As the size and weight is not normally known we use several freight carriers to ensure you get the best price. Complete your order or quote and we will get back to you with the available freight options.

Low-cost RF over Fiber Transceiver

The OZ600 is a low cost high performance Broadband Optical Transceiver with very wide Dynamic Range designed for RF over Fiber applications. A pair of OZ600 transceivers will create a bi-directional RF to Optical and Optical to RF link. OZ600 may also be configured as individual Transmitter (Tx) or Receiver (Rx) units. Each unit is packaged in a rugged dust-tight Cast Metal housing. These linear RFoF links are anexcellent alternative to using coaxial cable systems. The OZ600 delivers significant improvements in the transport of RF signals in their native format reliably in many optical networks across broad range of frequencies. The OZ600 offers high Spurious Free Dynamic Range (SFDR) with operational frequencies from 30 MHz to 2.7 GHz. Optional extended bandwidth of up to 10 KHz to 3.3 GHz is also available. The Manual Gain Control feature enables the installers an easy way to adjust receiver output RF level to facilitate simple field installations.


The standard optical connector is SC/APC (FC/APC available) for low back reflection applications and the RF interface is via a 50 Ohms SMA connector. The transceiver features a high performance InGaAs photodiode and a linear optically Isolated FP Laser operating at 1.3 μm (A) over 9/125 μm Single Mode Fiber. Average Automatic Power Control (AAPC) is incorporated for optimal optical power stability over the full operating temperature range. Alarm and monitoring functions are available through DB connectors and local dual color LED’s for Received Optical Power and Laser Bias Current Monitoring.

  • Wi-Max/4G LTE
  • Cellular Backhaul
  • MMDS
  • Remote Antenna Location
  • Satcom
  • In-Building DAS Solutions
  • Outdoor DAS Solutions
  • GPS Distribution
  • Timing Delay

Features

  • 30 MHz to 2.7 GHz Bandwidth
  • Rugged Dust-Tight Housing
  • 3 x 5 x 1.25 in. Weight ¾ lb
  • -40oC to +75oC Operating Temperature
  • LD/PD Monitoring and Alarm
  • High Spurious Free Dynamic Range
  • Automatic Optical Power Control
  • 1.3 μm Low Noise FP Lasers
  • Laser Conforms to Class 1 Emission Level per CDRH and IEC-825 (EN 60825) Standards

Absolute Maximum Ratings

Parameter Symbol Min Max Units
Storage Temperature (Case) Ts -40 +85 OC
Operating Temperature (Case) FP Laser To  -40 +75 OC
DC Supply Voltage VPD +11.5 +12.5 Volts
Maximum RF input into Tx (no LNA)     +15 dBm
Maximum Optical Input into Rx     4 mW

Characteristics of OZ600

Parameter Symbol Min Typical Max Units Notes
Power Supply Voltage VCC   12   Volts  
Power Supply Current ICC   240 320 mA  
Laser Optical Output Power     2 4 mW  
Transmitter Operating Wavelength A/B     1310   nm  
Receiver Operating Wavelength B/A     1310   nm  
High Frequency Cutoff HFC   2700 3300 MHz 1
Low Frequency Cutoff LFC .01 30   MHz 2
Frequency Response (30 – 2700 MHz)     +/1 1.5   dB  
Input/Output Impedance Z   50   Ohms  
Input/Output VSWR (30-2700 MHz)     1.5:1 2:1    
Spur Free Dynamic Range SFDR   108   (dB/Hz)2/3 3
RF Link Gain   -1 0 +1 dB 3
Input Noise Floor @ 1Ghz EIN -129 -133   dBm-Hz 3
Input Third Order Intercept @ 1Ghz IIP3 26 30   dBm 4
Isolation   50 60   dB 5
Group Delay Over 4MHz (30-2700 MHz)     1   nS  

1. Typical High Frequency Cutoff (HFC) is 2700 MHz. For higher HFC contact Factory.
2. Typical Low Frequency Cutoff (LFC) is 30 MHz. For lower LFC contact Factory.
3. Measured with 1 meter of Single Mode Fiber.
4. Equivalent to IMD 60dB@0 dBm Total Output Power (2 tone measurement).
5. Measured at 1GHz

Characteristics of OZ600 with LNA

Parameter Symbol Min Typical Max Units Notes
Power Supply Voltage VCC   +12   Volts  
Power Supply Current ICC   320 380 mA  
Laser Optical Output Power     2 4 mW  
Transmitter Operating Wavelength A/B     1310   nm  
Receiver Operating Wavelength B/A     1310   nm  
High Frequency Cutoff HFC   2700 3300 MHz 1
Low Frequency Cutoff LFC .01 30   MHz 2
Frequency Response (30 – 2700 MHz)     +/1 1.5   dB  
Input/Output Impedance Z   50   Ohms  
Input/Output VSWR (30-2700 MHz)     1.7:1 2:1    
Spur Free Dynamic Range SFDR   109   (dB/Hz)2/3 3
RF Link Gain   19 20 21 dB 3
Input Noise Floor @ 1Ghz EIN -149 -153   dBm-Hz 3
Input Third Order Intercept @ 1Ghz IIP3   12   dBm 4
Isolation   50 60   dB 5
Group Delay Over 4MHz (30-2700 MHz)     1   nS  
  1.  Typical High Frequency Cutoff (HFC) is 2700 MHz. For higher HFC contact Factory.
  2. Typical Low Frequency Cutoff (LFC) is 30 MHz. For lower LFC contact Factory.
  3. Measured with 1 meter of Single Mode Fiber.
  4. Equivalent to IMD 60dB@0 dBm Total Output Power (2 tone measurement).
  5. Measured at 1GHz

 

A13-Z600-55S-AF-M0L
Model # OZ659
Brand Optical Zonu

Configuration

TypeTransceiver
Laser1550 nm
ConnectorSC / APC
ModeMultimode
WDMNil
ConnectorSC / APC
Datasheet:

More From This Category


3GHz Premium TRx

3GHz Premium TRx

SKU: OZ1603

6 GHz Premium TRx

6 GHz Premium TRx

SKU: OZ1606

6GHz RFoF Link

6GHz RFoF Link

SKU: OZ516

6GHz RFoF LinkStandard RFoF TRx

6GHz RFoF LinkStandard RFoF TRx

SKU: OZ810

6GHz Ultra RFoF TRx

6GHz Ultra RFoF TRx

SKU: OZ816

Mini RFoF Link

Mini RFoF Link

SKU: OZ101

OZ600 Series RFoF Receiver with 1310 nm laser

OZ600 Series RFoF Receiver with 1310 nm laser

SKU: A23-Z600-31S-AS-SW0

OZ600 Series RFoF Receiver with 1310 nm laser

OZ600 Series RFoF Receiver with 1310 nm laser

SKU: A23-Z600-31F-AS-SW0