The SATEL-LP8 offers an extremely easy solution for simple I/O and serial communications. With software-free radio setup, SATEL-LP offers a cost-effective wireless solution where it is too costly or not possible to run a wire.
All SATEL-LP modules are DIN rail mountable. The communications over the air interface is secured with a 128-bit AES encryption and authentication.
SATEL-LP expansion modules offer direct connection of common industrial signals to the SATEL-LP radio modules, eliminating the need for RTU or PLC devices. Expansion modules are hot-swappable and up to 32 expansion modules can be added to one SATEL-LP radio module.
Mesh networks with up to 250 nodes. Easy point-topoint or network structures such as line, star or mesh.
- Licence free 869 MHz
- Designed to be used in Europe
- For short- or middle-range applications of up to 20 kilometres
- FHSS (Frequency Hopping Spread Spectrum)*
- Mesh networks of up to 99 devices
- Easy, software-free configuration
- High-speed communications, up to 500 kbps
- Hot-swappable modular I/O
- All-in-one wireless platform
- Mesh networks with up to 250 nodes
- Frequency hopping spread spectrum
* Depends on the topology and baud rate
Frequency Range | 902 ~ 928 MHz |
Receiver sensitivity (adjustable) |
-112 dBm (16 kbps) -105 dBm -102 dBm (250 kbps) -95 dBm (500 kbps) |
Carrier max. power |
1000 mW (adjustable) |
Supply voltage | 10.8 … 30.5 Vdc |
Max. current consumption (@ 24 VDC@25°C, stand-alone) |
328 mA |
Temperature Range | -40 … +70°C |
Serial Interface | RS-232, RS-485 |
Size H x W x D | 35 x 99 x 114.5 mm |
Antenna Connector | RSMA (female) |
Air Interface Encryption | AES128 |
Transient Surge Protection | Yes |
Degree of protection | IP20 |
Number of supported devices | ≤ 250 (Addressing via software) |
Conformance | FCC Part 15.247, IC RSS-210 |
Vibration (operation) | in accordance with IEC 60068-2-6: 5 g, 10 Hz ... 150 Hz |
Shock | 16 g, 11 ms |
YM0408 | |
Model # | YM0424 |
Brand | SATEL |